6.75" Punch Series Component Speakers System
Rockford Fosgate P1675-S 6.75" Punch Series Component Speakers System
The P1675-S is a 6.75" 2-way component system with 1" soft dome tweeters and is rated at 60 watts RMS. The system includes two woofers with grills, a pair of tweeters, integrated crossovers, and mounting hardware.
- component speaker system includes 2 woofers, 2 tweeters, and 2 woofer grilles
- 6-3/4" mineral-filled polypropylene woofer
- butyl rubber surround
- 1" polyetherimide (PEI) dome tweeter
- crossovers built into woofer baskets
- Vertical Attach Surround Technique (VAST™) increases cone area
- power range: 6-60 watts RMS (120 watts peak power)
- frequency response: 55-22,000 Hz
- sensitivity: 92 dB
- top-mount depth: 2-1/4"
|Speaker Size||6 3/4|
|Tweeter Design||1" Dome|
|Tweeter Composition||Treated PEI|
|Woofer Composition||Mineral filled IMPP|
|Woofer Surround||Butyl Rubber|
|Sensitivity (1W at 1 meter)||89|
|Sensitivity at 2.83 volts||92|
|Frequency Response||55 - 22k Hz|
|Minimum RMS Wattage||6|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||2 1/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 5/8|
Injection-Molded Polypropylene Woofers: The woofer cones are mineral filled, injection-molded polypropylene. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also light weight and rigid for decreased distortion and improved bass response.
Butyl Rubber Surrounds: The butyl rubber surrounds dampen unwanted harmonic distortion while maintaining linear geometry under extreme weather conditions. This leads to less distortion, superior frequency response, and superior durability.
VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.
Mounting: The tweeters have multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:
| ||Flush||Surface 10°||Surface 30°|
|Mounting Depth||0.911"||Screw Depth||Screw Depth|
Crossovers: The high-pass crossovers are integrated into the baskets of the woofers. The slope is 12dB per octave.